Phenomenon
①
②
Check if the mode were set as slave
mode, lightness and color temperature
of the products cannot be controlled
in slave mode
Check if the product is “switch off”
because of the APP of mobile phone.
Make sure the adapter
is well contacted with
the power plug
Charge the battery
before using it
Press the “mode”
button for once, switch
the mode from slave
mode to host mode
Press the “ON/OFF”
button once again
Troubleshooting
Check the product
Troubleshooting
The switch
indicator does
not light up
The knob of
lightness and
color temperature
are out of control
The screen and
the light are off
when the
product is in
the state of
power-on
Check the matching power adapter
indicator light up or not.
When using lithium battery, make
sure there’s n o “low power”
protection.
13
To Next Page
Loading...
