1. After the data logging setup has been completed,
the Run, Pause and Stop icons will become
available. The icons are colored orange when they
are available.
To start measurement, press the Run icon.
Measurements will automatically start to be logged.
If the Chart or Histogram options were selected,
then they will also be plotted as the data is logged.
Press the Pause icon to pause logging. Press
the Run icon again to resume.
Press the Stop Icon to stop data logging
prematurely.
Each time you use the data logging function,
a new sheet will be created for the data and
for the histogram data, if the Histogram
option is enabled.
Note that the other icons are now disabled
until logging has finished or is stopped.
To Next Page
Loading...
