SETUP
7
Installation
Up to three items need to be installed, the USB driver (not needed if using the
RS232 interface), the GDM-9060/9061 Series Excel Addin Software and the
NI VISA Run-Time.
Installing the USB
driver
1. Connect the DMM to the PC using the supplied
USB TypeA to TypeB cable (GTL-246).
2. The Windows Found New Hardware Wizard will
detect the DMM as a new device and ask for the
device driver.
Choose to locate the driver manually.
Direct the Wizard to the USB_DRIVER directory
on the User Manual CD, or download the USB
driver from the GW Instek Website.
3. Follow the instructions on the Hardware Wizard to
finish the installation.
Installing the
Excel Add-In
1. On the User Manual CD, go to the Excel Add-in
subdirectory under the Software directory and
execute the Setup.exe file.
2. If the Microsoft User Account Control Shield
appears, allow the setup file to be executed.
3. Follow the InstallShield Wizard to install the
GDM-9060/9061 Excel Addin.
Installing the NI
VISA Run-Time
1. The NI VISA Run-Time must be installed to use the
Excel Add-in software. This is available on the NI
website,
http://www.ni.com/download/ni-visa-run-time-eng
ine-5.4/4231/en/.
2. Please follow the instructions on the NI website for
installation details.
To Next Page
Loading...
