GW Instek GDM-9061 Series - Overview of Excel Add-In Features

GDM-9060/9061 Series Excel Add-In Manual
4
INTRODUCTION
This manual is suitable for any of the GDM-9060/9061 Series DMMs
(GDM-9060/9061). This manual is to be used with all versions of Excel from
2003 onwards with Windows PCs (Windows XP, Windows 7/8/10: 32 bit or
64 bit). Please note that Macros must be enabled for the Add-In to function.
The GDM-9060/9061 Excel AddIn software is an Add-In for Microsoft
Excel. The Add-In allows you to log measurements from the DMM and to
plot the resulting data as a graph or a histogram using the built-in Excel
graphing functions.
Overview
About Icon
Save/Load
Multimeter Settings
Setup/Run Logging
Worksheet
Run/Pause/
Stop
Setup
Multimeter
Connect to
Multimeter
 Connect to Multimeter: Clicking this icon will allow you to establish a
connection to the DMM.
 Save/Load Multimeter Settings: Clicking this icon will let you save or
load settings to/from the multimeter.
 Setup Multimeter: Clicking this icon will allow you to choose the
measurement function, range and rate to use for the data logging.
 Setup/Run Logging Worksheet: Clicking this icon will allow you to setup
the data logging and graphing functions for the software.
 Run/Pause/Stop: These control keys will allow you to run, pause and stop
data logging.
 About: The about icon will display the software version.