GW Instek GDS-1000-U Series - Automatically Measuring the Input Signals

GDS-1000-U Series User Manual
54
Automatically measuring the input signals
Viewing the
measurement
result
1. Press the Measure key.
Measure
2. The measurement results appear on the menu
bar, constantly updated. 5 measurement slots
(F1 to F5) can be customized.
Selecting a
measurement
item
3. Press F3 repeatedly to select
the measurement type:
Voltage or Time.
Voltage
Vpp
4. Use the Variable knob to
select the measurement
item.
VARIABLE
5. Press Previous Menu to
confirm the item selection
and to go back to the
measurement results view.
Previous
Menu