GW Instek GDS-1000-U Series - Using the USB File Utilities

SAVE/RECALL
99
Using the USB file utilities
Background
When a USB flash drive is inserted into the
oscilloscope, file utilities (file deletion, folder
creation and file/folder renaming) are available
from the front panel.
Procedure
1. Insert a USB flash drive into
the front panel USB port.
2. Press the Save/Recall key.
Select any save or recall
function. For example USB
Destination in the Save
image function.
Save/Recall
(Example)
Save
Image
Destination
USB
3. Press File Utilities. The
display shows the USB flash
drive contents.
File
Utilities
4. Use the Variable knob to
move the cursor. Press Select
to go into the folder or go
back to the previous
directory level.
VARIABLE
Select
USB flash drive
indicator
When a USB flash drive is inserted into the
oscilloscope, an indicator appears at the right
bottom corner of the display. (The USB flash drive
shouldn’t be removed when a file is saved or
retrieved from USB).
USB