GW Instek GDS-1000B Series User Manual

GETTING STARTED
7
6. Use the Variable knob and Select
key to navigate to the
DataLog_1KB.gz file on the USB
drive.
7. Press the Select key to start the
installation.
VARIABLE
Select
8. The installation will complete in a few seconds.
When finished a pop-up message will appear
asking you to restart the GDS-1000B.
9. Restart the GDS-1000B.

GW Instek GDS-1000B Series Specifications

General

Brand	GW Instek
Model	GDS-1000B Series
Category	Test Equipment
Language	English