GW Instek GDS-200 Series User Manual

OPERATION
151
2. The selected mode will be previewed in the
lower corner.
Continuity key
Multimeter
settings
Preview screen
3. Press anywhere outside of the multimeter
settings area to return to the main display.
4. The approximate resistance will be displayed
when there is continuity present in the
connection.
OPEN will be displayed if continuity is not
present.
Example
Continuity result
DMM mode Hold on/off

GW Instek GDS-200 Series Specifications

General

Brand	GW Instek
Model	GDS-200 Series
Category	Test Equipment
Language	English