GW Instek GDS-200 Series User Manual

OPERATION
99
Setting the System Date & Time
Background
The GDS-200/300 will keep the date and time
settings saved so long as the battery is not
allowed to fully discharged.
1. Press Utility>System>Date&Time.
The Date&Time menu will appear.
2. To set the date, press Date and use the number
picker to set the year, month and day.
3. To set the time, press Time and use the number
picker to set the hour and minute.
4. Press OK to save the date and time settings.
Note
The date and time settings only remain saved if
the battery is not fully drained. However, if the unit
shuts down due to insufficient battery power, there
will usually still be enough battery power to keep
the internal clock running for sometime.

GW Instek GDS-200 Series Specifications

General

Brand	GW Instek
Model	GDS-200 Series
Category	Test Equipment
Language	English