GW Instek GDS-820 - Page 26

GDS-806/810/820/840 Programming Manual
25
:ACQuire:LENGth
Select the number of record length. This oscilloscope provides record length of
500, 1250, 2500, 5000, 12500, 25000, 50000, and 125000.
Syntax
:ACQuire:LENGth {0|1|2|3|4|5|6|7}
:ACQuire:LENGth?
Arguments
0→Record length is 500 1→Record length is 1250 2→Record length is 2500
3→Record length is 5000 4→Record length is 12500 5→Record length is 25000
6→Record length is 50000 7→Record length is 125000
Returns
<NR1>
:ACQuire:MODe
Select the waveform acquisition mode. There are four different acquisition mode:
sample, peak detection, average and accumulate.
Syntax
:ACQuire:MODe {0|1|2}
:ACQuire:MODe?
Arguments
0→Select the sample mode 1→Select the peak detection mode
2→Select the average mode
Returns
<NR1>
Note: Please select the specific acquire mode before implement any acquisition.