GW Instek GDS-820 - Page 41

GDS-806/810/820/840 Programming Manual
40
:GONogo:NGCount? (query only) (Available for firmware 2.0 and above only)
Return the value of fail count and total count.
Syntax
:GONogo:NGCount?
Returns
<NR1>
:GONogo:NGDefine (Available for firmware 2.0 and above only)
Sets and query the user-defined NO-GO conditions. This command is equal to
the function key “F4” pressing for UTILITY menu of second page.
Syntax
:GONogo:NGDefine {0|1}
:GONogo:NGDefine?
Arguments
0→Define waveform not exceed the
template means NO-GO
1→Define waveform exceed the
template means NO-GO
Returns
<NR1>