GW Instek GDS-820 - Page 42

GDS-806/810/820/840 Programming Manual
41
:GONogo:SOURce (Available for firmware 2.0 and above only)
Sets and query the user-defined GO/NO-GO comparison source channel. This
command is equal to the function key “F2” pressing of GO/NO-GO menu.
Syntax
:GONogo:SOURce {0|1}
:GONogo:SOURce?
Arguments
0→Select CH1 to be the comparison
source.
1→Select CH2 to be the
comparison source.
Returns
<NR1>
:GONogo:VIOLation (Available for firmware 2.0 and above only)
Sets and query the user-defined GO/NO-GO violation conditions. This command is
equal to the function key “F3” pressing of GO/NO-GO menu.
Syntax
:GONogo:VIOLation {0|3}
:GONogo:VIOLation?
Arguments
0→Stop 1→Stop + beep
2→Continue 3→Continue + beep
Returns
<NR1>