OPERATION
CH1/CH2 Tracking Parallel Mode
Background /
Connection
Tracking parallel operation doubles the current
capacity of the GPD-X303S series by internally
connecting CH1 and CH2 in parallel and
combining the output to a single channel. CH1
controls the combined output.
LOAD
Output rating
0 ~ 30V/0 ~ 6A
1. Press the PARA/INDEP key
to activate the tracking
parallel mode. The key LED
turns on.
2. Connect the load to the CH1 +/− terminals.
Note: this diagram shows non-European terminals.
39
To Next Page
Loading...
