GW Instek GPD-303S Series - Page 52

GPD-X303S Series User Manual
Response time
Minimum 10ms
ERR?
Description
Checks the error status of the instrument and
returns the last error message.
Response time
Minimum 10ms
Contents
See page 46 for the list of error messages.
HELP?
Description
Shows the command list.
Response time
Minimum 50ms
Return
parameters
ISET<x>:<NR2> Sets the value of current.
VSET<x>:<NR2> Sets the value of voltage.
ISET<x>？ Return the value of current.
VSET<x>？ Return the value of voltage.
IOUT<x>？ Returns actual output current，
VOUT<x>？ Returns actual output voltage.
TRACK<NR1> Sets the output of the power supply working
on independent or tracking mode.
BAUD< NR1 >Set the value of baud rate.
RCL<NR1> Recall the setting data from the memory which
previous saved.
SAV<NR1> Saves the setting data to memory.
BEEP<Boolean> Sets the BEEP state on or off.
OUT<Boolean> Sets the output state on or off.
LOCAL Return to local mode
*IDN？ Returns instrument identification.
ERR？ Returns instrument error messages.
STATUS？ Returns the power supply state.
Note
All response time estimates are based on a baud rate of
115200bps. Expect longer response times with a baud rate of
57600bps or 9600bps.
52