GW Instek PSP-603 - Current Limit Settings

OPERATION
19
Current Limit Settings
The current limit settings determine the maximum
current output for the power supply.
Panel operation
1. Press the I LIMIT key. The I-const
icon will flash.
I LIMIT
2. Use the scroll wheel to adjust the
current limit in the I-const field.
3. Press ENTER to confirm the limit
setting.
ENTER
L I M I TS
Ou t pu t
Of f
U- co n s t
I -c on s t
P - c o ns t
Range
0~Rating
Step resolution
Fine
1mA
Coarse
10mA
Max Limit
4. Hold the I LIMIT key for 2 seconds to
set to the rating current and to exit.
I LIMIT
Clear
5. The CE key can be pressed to clear the
current limit to the previous value
when editing. This will also cancel
editing the current limit and exit.
CE
Note
Editing the current limit will automatically adjust the
power limit.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com