PSP Series User Manual
34
Commands can be written in ASCII or
Hexadecimal. Below are examples of ASCII and
hexadecimal commands.
Each command must have a carriage return and
line feed character as a message terminator.
All return messages are terminated with a
carriage return and line feed terminator.
Carriage return/line feed
Depend on firmware version, there will be
different ending characters for the response code.
It may appear on the display either <CR><LF>
0x0D 0x0A or <CR><CR><LF> 0x0D 0x0D 0x0A
Refer to the section of "Setting for different
command format" page for further information.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
