GW Instek PSU 12.5-120 - Slew Rate; Bleeder Control

PSU Series Quick Start Guide
24
Setting the
Protection Level
4. Use the current knob to set the
protection level for the selected
function.
Current
Setting Range
PSU Model
OCP
OVP
UVL
6-200
5~220
0.6~6.6
0~6.3
12.5-120
5~132
1.25~13.75
0~13.12
20-76
5~83.6
2~22
0~21
40-38
3.8~41.8
4~44
0~42
60-25
2.5~27.5
5~66
0~63
5. Press PROT again to exit. The
PROT key light will turn off.
PROT
Clear
OVP/OCP/UVL
protection
The OVP, OCP or UVL protection
can be cleared after it has been
tripped by holding the ALM_CLR
button for 3 seconds.
PROT
ALM_CLR