What to do when the password is forgotten?
Please refer to 3.2.2.4 to restore IP address and password.
3.3.2.4 Restore the Initial Setting
(1) Click menu bar [restore the initial setting] on the Web page, popup dialog box as
shown below:
Restore the initial setting
(2) Click <Ok> button and restore the initial setting, press <Cancel > button to
cancel the restore of the initial setting.
(3) After pressing <Ok> button, wait for 10 seconds, the product restores the
initial setting.
To restore the initial setting means to restore two menu configuration
information of [PoE setting] and [Port status and control] in the Web to
factory default setting, please use in caution.
15 16
(1) When product IP address is changed, please ensure that the computer IP
address and the product IP address must be in the same network segment
and the settings of subnet mask and gateway must be correct.
(2) When changing product IP address, please ensure the power supply to
avoid abnormal problems.
(3) What to do if you forget the IP address of the product? Please refer to
3.3.2.5 restore the initial setting.
3.3.2.3 Change Password
Login password: the product only provides one user name “admin”， default
password is “admin”，
and the password length must be between 5～20,
Please change the password in time for system safety
The change will take effect
on next login.
(1)Click the Web management page
menu bar [change password], then It
will pop up a dialog box of changing
password.
(2 ) E nte r t he pro duc t c urr ent
password and the new password,
then confirm the new password.
(3)Click the <ok> key and then a
dialog box as the picture will pop
up, click <Close>.
Caution
Caution
Caution
To Next Page
Loading...
Need help?
General