GYS GYSflash 4A - LED Indicators; Protection Features

8/33
3,6A ± 10%
(4A max)
5A ± 10%
(7A max)
3,6A ± 10%
(4A max)
5A ± 10%
(7A max)
7 Absorption
Charges the battery up to 100%
14.4V ± 0.1V
14.4V ± 0.1V
14.7V ± 0.1V
8
Analysis
Analyse the charge of the battery
9 Floating
Maintain the charge
13.6V ± 0.1V
13.6V ± 0.1V
13.8V ± 0.1V
10
Maintenance
Starts maintenance charge
• LED indications
The LED 4 (see schema page 28) flashes intermittently from stage1 to 5. Then it will be switched on
continuously from stage 6 to 8 and switch off for the stage 9. During the stage 9, the LED 5 will
switch on.
• Estimated time of charge
Vehicle
Battery
capacity (Ah
Time of
charge from
20 % to 80%
(hours)
Vehicle
Battery
capacity
(Ah)
Time of charge from 20 % to 80%
(hours)
Gysflash
4A/7A
4A/7A
Gysflash
4A/7A
4A
7A
2
2H
20
3H30
2H
8
6H
70
11H
6H
15
11H30
100
Maintenance
9H
130
Maintenance
11h30
180
-
Maintenance
230
-
Maintenance
The product restarts the charge automatically in the event if a power cut or power supply failure.
Hence, it is ideal to be connected permanently on the vehicle, for wintering cars, bikes, boats … »
PROTECTION
The GYSFLASH is protected against short circuits and polarity reversals. It also has an anti-spark
system to avoid sparks when connecting the clamps to the battery terminals. This charger has a
double insulation and is compatible with the onboard electronics of all vehicles.