How to solve the post-gas default issue on my GYS GYSMI E160 Welding System?
If there is a default coming from post-gas or the gas has been stopped prematurely on your GYS Welding System, increase post-gas duration.
General| AC input voltage | 230 V |
|---|---|
| Power consumption | 7.5 kVA |
| AC input frequency | 50 - 60 Hz |
| Welding processes | - |
| Maximum welding current | 160 A |
| Minimum welding current | 10 A |
| Variable welding current | Yes |
| Maximum electrode diameter | 4 mm |
| Minimum electrode diameter | 1.6 mm |
Weight and Dimensions| Depth | 210 mm |
|---|---|
| Width | 100 mm |
| Height | 270 mm |
| Weight | 4600 g |
Safety precautions for welding, including protective gear and personal safety.
Hazards from welding fumes, gas, and risks of fire and explosion.
Critical safety measures for electrical connections and avoiding shocks.
Instructions for connecting the power supply and safely starting the device.
Common problems, their causes, and recommended solutions for the welding machine.
Key technical specifications including voltage, current, duty cycle, and dimensions.
To Next Page
