ICON SPECIFICATIONS
H = High Temperature Range
R = Ready Mode
F1 = Filter Cycle 1 Running
O3 = Ozone Running
C = Cleanup Cycle
Wi-Fi Signal Indicator
Lock Indicator Icon
Invert Screen
Light Icon = Turns On/Off
Music Icon = Press To Enter Music Screen*
Message Waiting Indicator
Set Temperature Up
Swim Spa Equipment Control Icon
Temperature Scale (F/C)
Current Water Temperature
Settings Icon
Heat Indicator
Set Temperature Down
Swim spa Controls
The Main Screen
SWIM SPA STATUS
Important information about swim spa operation can be seen on the Main Screen. Most features,
including Set Temperature adjustment, can be accessed from this screen. The actual water
temperature can be seen, and the Set Temperature can be adjusted. Time-of-Day, Ozone and
Filter status is available, along with other messages and alerts. The selected Temperature Range
is indicated in the upper left corner. The Swim Spa Equipment Control Icon in the center will spin
if any pump is running. A Lock icon is visible if the panel or settings are locked.
Note: After 30 minutes the display will automatically go into sleep mode, which turns the display
off. This is normal operation. Touch anywhere on the screen to wake the panel up.
*Only if Fusion Touch Sound is equipped. Options vary by model.
To Next Page
Loading...