SENSORS ARE OUT OF SYNC – M015**
The temperature sensors MAY be out of sync by 3°F (1°C). Call for service if this message does not
disappear within a few minutes.
SENSORS ARE OUT OF SYNC -- CALL FOR SERVICE* – M026**
The temperature sensors ARE out of sync. The fault above has been established for at least 1 hour.
Call for service.
COMMUNICATIONS ERROR
The control panel is not receiving communication from the System. Call for service.
TEST SOFTWARE INSTALLED
The Control System is operating with test software. Call for service.
SENSOR A FAULT, SENOR B FAULT –
SENSOR A: M031**, SENSOR B: M032**
A temperature sensor or sensor circuit has
failed. Call for service.
* Some messages can be reset from the panel. Messages that can be reset will appear with a Clear
Icon at the bottom of the Message Screen. Press the Clear Icon text to reset the message.
**M0XX is a Message Code. Codes like this will be seen in the Fault Log
To Next Page
Loading...