MEMORY FAILURE - CHECKSUM ERROR*
At power up, the system has failed the Program Checksum Test. This indicates a problem with the
firmware (operation program) and requires a service call.
MEMORY WARNING - PERSISTENT MEMORY RESET*
Appears after any system setup change. Contact your dealer or service organization if this message
appears on more than one power up, or if it appears after the system has been running normally
for a period of time.
MEMORY FAILURE - CLOCK ERROR*
Contact your dealer or service organization.
CONFIGURATION ERROR – SWIM SPA WILL NOT START UP
Contact your dealer or service organization.
A PUMP APPEARS TO BE STUCK ON
Water may be overheated. POWER DOWN THE Swim spa. DO NOT ENTER THE WATER. Contact
your dealer or service organization.
A PUMP APPEARS TO HAVE BEEN STUCK ON WHEN SWIM SPA WAS
LAST POWERED
POWER DOWN THE Swim spa. DO NOT ENTER THE WATER. Contact your dealer or service organi-
zation.
* This message can be reset from the topside panel with any button press.
Swim spa Controls
System Related Messages
To Next Page
Loading...