ALL EQUIPMENT ACCESS
The Spa Screen shows all available equipment* to control. The display shows icons that are related
to the equipment installed on a particular swim spa model, so this screen may change depending
on the installation.
The icon buttons are used to select and control individual devices.
Some devices, like pumps, may have more than one ON state, so the icon will change to reflect the
state of the equipment. Below are some examples of 2-speed Pump indicators.
Jets Off Jets Low Jets High
If the Swim Spa has a Circulation Pump, a Circulation Pump Icon will appear to indicate its activity,
but outside of Priming Mode, the Circulation Pump cannot be controlled directly.
* One exception: The Main Spa Light is not shown on the Spa Screen; it is only shown
(and controlled) on the Main Screen.
To Next Page
Loading...