H3C MSR 900 Series User Manual

1-4
Item Status Description
On A link is present.
Blinking
Data is being transmitted or
received.
Ethernet
interface
LEDs (0 to
9)
Off No link is present.
USB
interface
— Connecting to a USB device
RESET
button
—
Pressing the RESET button for over
three seconds to restore the factory
default settings
Generally, the WLAN LED on a wired MSR device (MSR 900 and
MSR 920) stays off.
Rear Panel
Figure 1-3 Rear panel of the MSR 900/MSR 900W

H3C MSR 900 Series Specifications

General

Brand	H3C
Model	MSR 900 Series
Category	Network Router
Language	English