H3C MSR 900 Series

4-1
4 System Management
Saving the Configuration
Select System Management > Configuration from the navigation
tree to enter the Save tab page, which is displayed by default, as
shown in
Figure 4-1.
Figure 4-1 Save the configuration
Click Save Current Settings to save the current configurations to the
configuration file.
z It takes some time for the system to save the configurations.
z The system does not support two or more users to save
configuration simultaneously. If such a case occurs, the system
will prompt the latter users to try again later.
Initialization
Select System Management > Configuration from the navigation
tree and click the Initialize tab to enter the page shown in
Figure 4-2.