1
Installing the router
!
To avoid injury, do not touch bare wires, terminals, or parts with high-voltage hazard signs.
The barcode on the router chassis contains product information that must be provided to local
sales agent when you return a faulty router for service.
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to
open the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any
Installation prerequisites
You have read "Preparing for installation" carefully.
All requirements in "Preparing for installation" are met.
Installation flow
You can install the router on a workbench or in a rack. Select an installation method according to the
installation environment, and follow the installation flowchart shown in Figure 1.
To Next Page
Loading...
