H3C MSR3600-28 - Connecting a DC Power Cord

48
Figure 63 Connecting an AC power cord to an
MSR3600-28-SI/3600-28-SI-GL/3600-28-X1/3600-51-SI/3600-51-X1 router
Figure 64 Connecting an AC power cord to an MSR3600-28-X1-DP/3600-51-X1-DP router
Connecting a DC power cord
WARNING
!
Pay attention to the mark on a power cord to avoid connection errors.
The following routers do not support DC power cords:
•
MSR3600-28
•
MSR3600-28-SI
•
MSR3600-28-SI-GL
•
MSR3600-28-X1
•
MSR3600-28-X1-DP
•
MSR3600-51-SI
The other routers use different DC connectors, but the power cord connection procedures are the
same. As a best practice, use the DC power cord provided with the router.
To connect DC power cords for an MSR3600-51-X1/MSR3600-51-X1-DP router:
1. Make sure the router is correctly grounded.
2. Connect one end of the power cord to the receptacle on the router, and the other end to a DC
power source.
1
2