49
To connect DC power cords for other routers:
1. Make sure the router is correctly grounded, and the power switch on the router is in the OFF
position.
Only the power modules applicable to an MSR 36-10/36-20 router or MSR 36-40/36-60 router
provide a power switch.
2. Loosen the captive screws on the power module with a Phillips screwdriver to remove the
power module connector.
3. Connect one end of the DC power cord supplied with the router to the DC receptacle on the
router, and the other end to a DC power source.
Figure 65 Connecting a DC power cord for an MSR 36-10/36-20
Figure 66 Connecting a DC power cord for an MSR 36-40/36-60
To Next Page
Loading...
