38
Figure 47 Installing a CF card
Installing a Micro SD card
To avoid startup failure of the router, do not replace the Micro SD card on an MSR3610-G or
MSR3620-G router yourself. If the Micro SD card is damaged, please contact the local sales
agent.
Micro SD cards on the MSR3610-G and MSR3620-G routers are not hot swappable.
Micro SD cards on the MSR3620-DP router are hot swappable. To prevent Micro SD card
damage and data loss, execute the
umount command before you hot swap a Micro SD card.
• Make sure a Micro SD card is installed with the metal pin side facing down.
Micro SD cards are only supported on the MSR3610-G, MSR3620-G, and MSR3620-DP routers. No
Micro SD card is provided with the MSR3620-DP router. You need to order Micro SD cards as
required.
To install a Micro SD card, push the Micro SD card slowly along the guide rails into the slot. To
prevent card damage, do not use extra force.
To Next Page
Loading...
