H3C MSR3600-28 - Installing the router in a rack; Mounting brackets

4
1. Make sure the workbench is clean, stable, and correctly grounded.
2. Place the router upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
Figure 4 Attaching the rubber feet (MSR 36-10 AC)
3. Place the router on the workbench with the upside up.
Figure 5 Mounting the router on a workbench (MSR 36-10 AC)
Installing the router in a rack
Mounting brackets
The following routers require only the front mounting brackets:
•
MSR3600-28
•
MSR3600-28-SI
•
MSR3600-28-SI-GL
•
MSR3600-28-X1
•
MSR3600-28-X1-DP
•
MSR3600-51
•
MSR3600-51-SI
•
MSR3600-51-X1
•
MSR3600-51-X1-DP
The following routers require both the front and rear mounting brackets:
•
MSR 36-10
•
MSR 36-20
•
MSR3610-G