About This Manual
Organization
H3C S5120-EI Series Ethernet Switches Installation Manual is organized as follows:
Chapter Contents
1 Product Overview
Briefly introduces the appearance, system description, as well as the
features and applications of the S5120-EI series switches.
2 Preparing for Installation
Describes the requirements on installation site, the safety
recommendations before and during installation, and the required
tools.
3 Installing the Switch
Covers the procedures for installing the S5120-EI series switches,
ground wire connection, power module installation, interface module
installation, and so on.
4 Starting and Configuring
the Switch
Helps you get familiar with the basic knowledge of how to boot and
configure the S5120-EI series switches, including device startup,
power-on, and initialization of system files, and so on.
5 Boot ROM and Host
Software Loading
Introduces how to load Boot ROM and host software for an S5120-EI
series switch
6 Maintenance and
Troubleshooting
Introduces the problems that might occur during the installation and the
booting of an S5120-EI series switch and the related solution.
Appendix
Appendix A: Lightning protection of the S5120-EI series switches.
Appendix B: Provides compliance and safety manual.
Conventions
The manual uses the following conventions:
GUI conventions
Convention Description
Boldface
Window names, button names, field names, and menu items are in
Boldface. For example, the New User window appears; click OK.
>
Multi-level menus are separated by angle brackets. For example, File >
Create > Folder.
Symbols
Convention Description
Means reader be extremely careful. Improper operation may cause
bodily injury.
Means reader be careful. Improper operation may cause data loss or
damage to equipment.
Means a complementary description.
To Next Page
Loading...
