H3C S5120-EI Series - Page 46

3-15
Step5 Connect the other end of the AC power cord to the external AC power supply system.
Step6 Check whether the system status LED (PWR) on the front panel of the switch is ON. If the LED is ON, it
shows the power cord is properly connected.
Figure 3-19 Connect an AC power cord to a horizontal AC power socket (1)
Figure 3-20 Connect an AC power cord to a horizontal AC power socket (2)
Figure 3-21 Connect an AC power cord to a vertical AC power socket (1)
Figure 3-22 Connect an AC power cord to a vertical AC power socket (2)