EasyManua.ls Logo

H3C S5120-EI Series - Page 61

H3C S5120-EI Series
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4-6
Copyright (c) 2004-2009 Hangzhou H3C Tech. Co., Ltd.
Creation date : May 7 2009, 09:06:06
CPU Clock Speed : 264MHz
BUS Clock Speed : 33MHz
Memory Size : 128MB
Mac Address : 000fe2d258fb
Press Ctrl-B to enter Boot Menu... 1
The last line asks whether you want to enter the Boot Menu. The system waits one second for your
response.
z The system has two startup modes: normal startup and fast startup. The normal startup mode
takes a little longer time than the fast startup mode because of more self-test operations.
z By default, the system starts up in fast startup mode and the waiting time here is one second. If you
set the startup mode to normal, this waiting time is five seconds. For the setting of the startup mode,
refer to the next section.
z If you press Ctrl + B within 1 second, the system displays:
Password :
Enter the correct Boot ROM password and click Enter to enter the Boot Menu. By default, no password
is set and you can click Enter directly to enter the Boot Menu.
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify bootrom password
6. Enter bootrom upgrade menu
7. Skip current configuration file
8. Set bootrom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 4-2 describes the fields above.
Table 4-2 Description on the fields
Item Description
1. Download application file to flash Download the application file to the flash memory
2. Select application file to boot Select the application file to boot

Table of Contents

Other manuals for H3C S5120-EI Series

Related product manuals