H3C S5120-EI Series - Reset Ip Routing-Table Statistics Protocol

16
Interface : InLoopBack0 Protocol : Direct
State : Active NoAdv Cost : 0
Tunnel ID : 0x0 Label : NULL
Age : 22161sec
Table 6 Output description
Field Description
Destination Destination IPv6 address
PrefixLength Prefix length of the address
Nexthop Next hop
Preference Route priority
RelayNextHop Recursive next hop
Tag Tag of the route
Neighbour Neighbor address
ProcessID Process ID
Interface Outbound interface
Protocol Routing protocol
State
State of the route, Active, Inactive, Adv (advertised), or NoAdv (not
advertised)
Cost Cost of the route
Tunnel ID Tunnel ID
Label Label
Age Time that has elapsed since the route was generated
reset ip routing-table statistics protocol
Syntax
reset ip routing-table statistics protocol { protocol | all }
View
User view
Default level
2: System level
Parameters
protocol: Clears statistics for the IPv4 routing protocol, which can be direct or static.
all: Clears statistics for all IPv4 routing protocols.
Description
Use the reset ip routing-table statistics protocol command to clear routing statistics for the routing table.
Examples
# Clear all the routing statistics.