H3C S5120-EI Series - IRF Configuration Commands; Display Irf

1
IRF configuration commands
NOTE:
In the S5120-EI series switches, only the followin
g
switch models support the commands in this chapter:
S5120-28C-EI, S5120-52C-EI, S5120-28C-PWR-EI, and S5120-52C-PWR-EI.
IRF configuration commands
display irf
Syntax
display irf [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI configuration in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.
Description
Use the display irf command to display information about the IRF virtual device.
The command displays information about all switches that have joined or are joining this IRF virtual
device.
Examples
# Display information about the IRF virtual device.
<Sysname> display irf
Switch Role Priority CPU-Mac Description
*+1 Master 2 0023-8929-4f83 -----
2 Slave 1 0023-8980-54ad -----
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The Bridge MAC of the IRF is: 0023-8929-4f70
Auto upgrade : no