H3C S5120V2-SI

68
Table 12 Technical specifications for the S5560S-SI switch series (2)
Item S5560S-28F-SI S5560S-28DP-SI
Dimensions (H × W ×
D)
43.6 × 440 × 360 mm (1.72 ×
17.32 × 14.17 in)
43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17
in)
Weight ≤ 6 kg (13.23 lb) ≤ 8 kg (17.64 lb)
Console port
• 1 × micro USB console port
• 1 × serial console port
Only the micro USB console port
is available when you connect
both ports.
• 1 × micro USB console port
• 1 × serial console port
• Only the micro USB console port is
available when you connect both ports.
USB port N/A 1
Management Ethernet
port
1 1
10/100/1000BASE-T
autosensing Ethernet
port
8 (Each and its corresponding
SFP port form a combo interface.)
24 (The eight highest-numbered
10/100/1000BASE-T autosensing Ethernet
port and their corresponding SFP ports form
combo interfaces.)
SFP port
24 (The eight highest-numbered
SFP ports and their
corresponding
10/100/1000BASE-T autosensing
Ethernet ports form combo
interfaces.)
12 (The eight highest-numbered SFP ports
and their corresponding 10/100/1000BASE-T
autosensing Ethernet ports form combo
interfaces.)
SFP+ port 4 N/A
Power module slot 2, on the rear panel 2, on the rear panel
Input voltage
• AC input
 Rated voltage range: 100
VAC to 240 VAC @ 50
Hz or 60 Hz
 Max voltage range: 90
VAC to 290 VAC @ 47
Hz to 63 Hz
• High-voltage DC input
 Rated voltage range: 240
VDC
 Max voltage range: 180
VDC to 320 VDC
• AC input
 Rated voltage range: 100 VAC to 240
VAC @ 50 Hz or 60 Hz
 Max voltage range: 90 VAC to 290
VAC @ 47 Hz to 63 Hz
• High-voltage DC input
 Rated voltage range: 240 VDC
 Max voltage range: 180 VDC to 320
VDC
Minimum power
consumption
• Single PSR75-12A: 15 W
• Dual PSR75-12A: 17 W
• Single PSR75-12A: 12 W
• Dual PSR75-12A: 13 W
Maximum power
consumption
• Single PSR75-12A: 45 W
• Dual PSR75-12A: 48 W
• Single PSR75-12A: 29 W
• Dual PSR75-12A: 32 W
Chassis leakage
current compliance
UL60950-1/EN60950-1/IEC60950-1/GB4943
Melting current of
power module fuse
3.15 A/250 V
Cooling system
Using fixed fan trays to intake cool air from the chassis left side and port side and
exhaust hot air from the chassis right side.
Operating temperature –5°C to +45°C (23°F to 113°F)
Operating humidity 5% RH to 95% RH, noncondensing