H3C S5170-EI Series - Installing the Switch

2-1
2 Installing the switch
CAUTION:
Keep the tamper
-
proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact H3C for permission. Otherwise, H3C shall not be liable for any consequence.
Figure2-1 Hardware installation flow
Start
Install the switch
Ground the switch
Connect the power cords
Verify the installation
Turn on circuit breakers
Operating correctly?
Turn off the
circuit breakers
Troubleshoot
Yes
No
End
Connect ports and cables
Removable power
supplies?
No
Yes
Install power supplies