H3C SecPath F50X0 Series Installation Manual

3-26
 The LEDs on the front panel indicate that the device is operating correctly. For more
information about LEDs, see "Appendix B LEDs."
 The fan blades are rotating and air is exhausted from the air outlet vents.
 The configuration terminal displays the following information:
The output on the configuration terminal varies by device software version.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
Press Ctrl+T to start heavy memory test
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing......Done.
****************************************************************************
* *
* H3C BootWare, Version 1.01 *
* *
****************************************************************************
Copyright (c) 2004-2021 New H3C Technologies Co., Ltd.
Compiled Date : Aug 2 2021
Memory Type : DDR4 SDRAM
Memory Size : 8152MB
Memory Speed : 1037MHz
flash Size : 3728MB
CPLD 1 Version : 0.0
CPLD 2 Version : 1.0
PCB 1 Version : Ver.A
PCB 2 Version : Ver.A
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Loading the main image files...
Loading file flash:/main-CMW710-SYSTEM-A8860P02.bin...Done.
Loading file flash:/main-CMW710-SECESCAN-A8860P02.bin...Done.
Loading file flash:/main-CMW710-BOOT-A8860P02.bin...Done.
Image file flash:/main-CMW710-BOOT-A8860P02.bin is self-decompressing....
............................................................................
..................................Done.
System image is starting...
Cryptographic algorithms tests passed.
Line con0 is available.
Press ENTER to get started...
...
Press Enter to access user view of the firewall.
NOTE:
To access the EXTENDED
-BOOTWARE menu, press Ctrl + B within four seconds at the
prompt "Press Ctrl+B to access EXTENDED-BOOTWARE MENU." If you do not press

H3C SecPath F50X0 Series Specifications

General

Brand	H3C
Model	SecPath F50X0 Series
Category	Firewall
Language	English