H3C WA Series Installation Guide

12
H3C recommends that outside of China this unit be PoE powered. See the H3C product
catalogs for 802.3af compatible power sources.
Table 7 Power Supply
Power Source
Connection Details
Ordering
information
AC/DC Power
Adapter
H3C WA2600
enhanced series
access points can
accept power from
an AC/DC power
adapter. Input
specification is as
follows:
+48V , 0.52A
min.
Connect the
adapter’s power jack
to the AP power
interface.
If you need an
AC/DC power
adapter for your
H3C WA2600
series access
point, you must
use the
FSP025-1AD207A
adapter(part
number
0231A0EQ) which
is available from
H3C.
Power over
Ethernet (PoE,
IEEE 802.3af
standard)
power source
H3C WA2600 series
access points can
accept power from a
PoE power source.
No DC power
adapter is required.
Connect the PoE
cable directly to the
10/100/1000 Base-TX
Ethernet connector.
See the H3C
product catalogs
for 802.3af
compatible
power sources.

H3C WA Series Specifications

General

Brand	H3C
Model	WA Series
Category	Wireless Access Point
Language	English