21
The WA2620E-AGN supports only non-standard PoE power supply (the PoE input power must
be at least 16W).
Connecting the AP to the network
The WA2600 enhanced series can access the Internet or metropolitan area network
(MAN) through the Ethernet uplink interface. Connect the Ethernet interface of the AP
to an Ethernet interface of an Ethernet switch to implement Internet or MAN access (see
Figure 13
Figure 13 Connect the AP to the network
Internet
WA2600
PC 1
Client A
PC 2
PoE switch
Client B
AC
To Next Page
Loading...
Need help?
General
