12-37
reset udp ipv6 statistics
Syntax
reset udp ipv6 statistics
View
User view
Default Level
2: System level
Parameters
None
Description
Use the reset udp ipv6 statistics command to clear the statistics of all IPv6 UDP packets.
You can use the display udp ipv6 statistics command to display the statistics of IPv6 UDP packets.
Examples
# Clear the statistics of all IPv6 UDP packets.
<Sysname> reset udp ipv6 statistics
tcp ipv6 timer fin-timeout
Syntax
tcp ipv6 timer fin-timeout wait-time
undo tcp ipv6 timer fin-timeout
View
System view
Default Level
2: System level
Parameters
wait-time: Length of the finwait timer for IPv6 TCP connections in seconds, in the range of 76 to 3,600.
Description
Use the tcp ipv6 timer fin-timeout command to set the finwait timer for IPv6 TCP connections.
Use the undo tcp ipv6 timer fin-timeout command to restore the default.
By default, the length of the finwait timer is 675 seconds.
Examples
# Set the finwait timer length of IPv6 TCP connections to 800 seconds.
<Sysname> system-view
[Sysname] tcp ipv6 timer fin-timeout 800
tcp ipv6 timer syn-timeout
Syntax
tcp ipv6 timer syn-timeout wait-time
To Next Page
Loading...
Need help?
General
