To Next Page

To Previous Page

5-9

<Sysname> display dhcp server conflict all

Address Discover time

4.4.4.1 Apr 25 2007 16:57:20

4.4.4.2 Apr 25 2007 17:00:10

--- total 2 entry ---

Table 5-1 display dhcp server conflict command output description

Field Description

Address Conflicted IP address

Discover Time Time when the conflict was discovered

display dhcp server expired

Syntax

display dhcp server expired { all | ip ip-address | pool [ pool-name ] }

View

Any view

Default Level

1: Monitor level

Parameters

all: Displays the lease expiration information of all DHCP address pools.

ip ip-address: Displays the lease expiration information of a specified IP address.

pool [ pool-name ]: Displays the lease expiration information of a specified address pool. The pool

name is a string of 1 to 35 characters. If the pool name is not specified, the lease expiration information

of all address pools is displayed.

Description

Use the display dhcp server expired command to display the lease expiration information of specified

DHCP address pool(s) or an IP address.

DHCP will assign these expired IP addresses to DHCP clients after all addresses have been assigned.

Examples

# Display information about lease expirations in all DHCP address pools.

<Sysname> display dhcp server expired all

IP address Client-identifier/ Lease expiration Type

Hardware address

4.4.4.6 3030-3066-2e65-3230- Apr 25 2007 17:10:47 Release

302e-3130-3234-2d45-

7468-6572-6e65-7430-

2f31

--- total 1 entry ---

H3C WA2600 Enhanced Series Command Reference

Other manuals for H3C WA2600 Enhanced Series