12-8
Field Description
T
Type of neighbor information, including static configuration and dynamic
acquisition.
Age
For a static entry, a hyphen “-“ is displayed. For a dynamic entry, the reachable
time (in seconds) elapsed is displayed, and if it is never reachable, “#” is displayed
(for a neighbor acquired dynamically).
display ipv6 neighbors count
Syntax
display ipv6 neighbors { all | dynamic | interface interface-type interface-number | static | vlan
vlan-id } count
View
Any view
Default Level
1: Monitor level
Parameters
all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically
and configured statically.
dynamic: Displays the total number of all neighbor entries acquired dynamically.
static: Displays the total number of neighbor entries configured statically.
interface interface-type interface-number: Displays the total number of neighbor entries of a specified
interface.
vlan vlan-id: Displays the total number of neighbor entries of a specified VLAN whose ID ranges from 1
to 4094.
Description
Use the display ipv6 neighbors count command to display the total number of neighbor entries
satisfying the specified condition.
Examples
# Display the total number of neighbor entries acquired dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total dynamic entry(ies): 2
display ipv6 pathmtu
Syntax
display ipv6 pathmtu { ipv6-address | all | dynamic | static }
View
Any view
Default Level
1: Monitor level
To Next Page
Loading...
Need help?
General
