3-1
3 Installing the AP
The WA2600 series WLAN APs can be directly fixed onto a wall by
using the wall-mounting brackets. The following introduces the
wall-mounting procedure of the WA2600 series in detail.
Installation Flowchart
Figure 3-1 shows the installation flowchart of the WA2600 series.
Figure 3-1 Installation flowchart
End
Determine the
installation position
Install the AP
Connect the power
supply and the network
Start
Determining the Installation Position
Determine the installation position by observing the following
principles:
z Leave as few obstacles (such as wall and ceiling) as possible
between the AP and the wireless stations.
To Next Page
Loading...
