H3C WA6520 - Page 25

To Next Page

To Previous Page

Contents

3 Appendix B LEDs and ports ·································································· 3-1

LEDs and buttons············································································································································ 3-1

Ports ································································································································································ 3-2

Main Page

Table of Contents6
Preparing for Installation7
Safety Recommendations7
Safety Labels7
General Safety Recommendations7
Site Preparation7
Installation Accessories8
Installation Tools8
Installing the AP9
Installation Flowchart9
Pre-Installation Tasks9
Determining the Installation Position10
Mounting the AP10
Mounting Bracket10
Mounting the AP on a Wall10
Mounting the AP on a Junction Box12
Mounting the AP on a Ceiling13
Connecting the AP to a Power Source14
Connecting a Local Power Source14
Connecting a Poe Power Source16
Check after Power-On16
Connecting Ethernet Fiber Ports16
Connecting the AP to the Network17
Verifying that the AP Has Been Connected to the Network When It Operates in Fit Mode17
Verifying that the AP Has Been Connected to the Network When It Operates in Cloud Mode18
Accessing the AP19
Logging in to the AP from the Console Port19
Connecting the AP to a Configuration Terminal from the Console Port19
Setting Parameters for the Configuration Terminal19
Procedure20
Logging in to the AP through Telnet20
Logging in from the Web Interface20
Configuring the AP from the Cloudnet Platform22
Downloading and Installing Cloudnet App Int22
Logging in to the Cloudnet Platform22

H3C WA6520 - Page 25

Table of Contents

Related product manuals