H3C WX User Manual

3-1
3 Feature Matrixes
In this document, Yes means a feature or command is supported, and No means not supported.
Feature Matrix for the WX5000 Series
The LS8M1WCMA0, LSWM1WCM10, and LSWM1WCM20 on the WX5000 series adopt the OAP architecture. Installed on the expansion slots of switches,
they work as OAP cards to exchange data and status and control information with the switches through their internal service interfaces. Do not configure
services such as QoS rate limiting and 802.1X authentication on GE interfaces on the LS8M1WCMA0, XGE 1/0/1 on the LSWM1WCM10, and the logical
interface BAGG1 aggregated by GE 1/0/1 and GE 1/0/2 on the LSWM1WCM20.
Table 3-1 Feature matrix for the WX5000 series
Document Module Feature WX5002 WX5002V2 LS8M1WCMA0 WX5004 LSWM1WCM10 LSWM1WCM20
AUX user interface Yes No Yes No Yes Yes
Console user interface No Yes No Yes No No
Login configuration
Telnet Yes Yes Yes Yes Yes Yes
Fundamentals
Configuration
Guide
User interface
configuration
User interface type
Console
user
interface not
supported
AUX user
interface not
supported
Yes
AUX user
interface
not
supported
Console user
interface not
supported
Console user
interface not
supported

H3C WX Specifications

General

Brand	H3C
Model	WX
Category	Controller
Language	English