H3C WX - Page 55

4-30
Volume Module Command WX3024 WX3010 WX3008
display qos map-table
Yes Yes Yes
display qos lr interface
No No No
if-match
classifier
tcl-name not
supported
inbound-interface
interface-type
interface-number not
supported
IPv6 ACL not supported
rtp start-port
start-port-number
end-port
end-port-number
not supported
classifier
tcl-name not
supported
inbound-interface
interface-type
interface-number not
supported
local-precedence
local-precedence-list not
supported
IPv6 ACL not supported
rtp start-port
start-port-number
end-port
end-port-number
not supported
classifier
tcl-name not
supported
inbound-interface
interface-type
interface-number not
supported
local-precedence
local-precedence-list not
supported
IPv6 ACL not supported
rtp start-port
start-port-number
end-port
end-port-number
not supported
qos pql inbound-interface
No No No
qos pql protocol
No No No
qos cql inbound-interface
No No No
qos cql protocol
No No No
qos car
Yes Yes Yes
qos lr
No No No
qos map-table
Yes Yes Yes
redirect
Yes Yes Yes
Congestion management
configuration commands
No No No
AAA commands
nas device-id
device-id No No No
Security Command
Reference
802.1X commands
dot1x max-user
user-number ranges from 1
to 2048.
user-number ranges from 1
to 2048.
user-number ranges from 1
to 2048.