H3C WX1800H Series - Irf Member Priority; Irf Member Renumber

10
text: Specifies an IRF member description, a string of 1 to 127 characters.
Examples
# Configure a description for IRF member 1.
<Sysname> system-view
[Sysname] irf member 1 description F1Num001
irf member priority
Use irf member priority to change the priority of an IRF member device.
Use undo irf member priority to restore the default.
Syntax
irf member member-id priority priority
undo irf member member-id priority
Default
The IRF member priority is 1.
Views
System view
Predefined user roles
network-admin
Parameters
member-id: Specifies a member device by its IRF member ID.
priority: Sets the member priority in the range of 1 to 32. The greater the priority value, the higher the
priority. A member with higher priority is more likely to be the master.
Usage guidelines
The new priority setting takes effect at the next master election, but it does not trigger a master
election.
Examples
# Set the priority of IRF member 2 to 32.
<Sysname> system-view
[Sysname] irf member 2 priority 32
irf member renumber
Use irf member renumber to change the IRF member ID of an IRF member device.
Use undo irf member renumber to restore the previous IRF member ID of the device.
Syntax
irf member member-id renumber new-member-id
undo irf member member-id renumber
Default
The IRF member ID is 1.
Views
System view