H3C WX1800H Series User Manual

13
Default
The IRF topo-domain ID is 0.
Views
System view
Predefined user roles
network-admin
Parameters
topo-domain-id: Specifies an IRF topo-domain ID in the range of 0 to 4294967295.
Usage guidelines
An IRF topo-domain ID uniquely identifies an IRF fabric.
You must assign the same topo-domain ID to devices you are adding to the same IRF fabric.
For the topo-domain ID change to take effect, you must reboot the device.
Examples
# Set the IRF topo-domain ID to 10.
<Sysname> system-view
[Sysname] irf topo-domain 10
The configuration will take effect at the next startup.
irf-optimize wlan reliable-access
Use irf-optimize wlan reliable-access to optimize IRF for reliable WLAN access.
Use undo irf-optimize wlan reliable-access to disable IRF optimization for WLAN access.
Syntax
irf-optimize wlan reliable-access
undo irf-optimize wlan reliable-access
Default
IRF optimization for WLAN access is enabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
Use this command to guarantee reliable AP and client access. This command accelerates IRF
master election, new member joining, and IRF member role change to prevent IRF events from
causing unstable AP or client access.
Examples
# Enable IRF optimization for reliable WLAN access.
<Sysname> system-view
[Sysname] irf-optimize wlan reliable-access

H3C WX1800H Series Specifications

General

Brand	H3C
Model	WX1800H Series
Category	IP Access Controllers
Language	English